May 02, 2024  
2017-2018 Course Catalog 
    
Catalog Navigation
  Catalog Home
  Brazosport College: The College of Choice
  President’s Welcome
  About Brazosport College
  2017-2018 Calendar
  Academic Services and Enrollment Policies
  Student Services
  Student Governance
  Transfer of Credit
  General Education Core Curriculum
  Distance Learning
  Degree, Certificate, and Transfer Pathways
  Course Directory
  The People of Brazosport College
  Campus Map
  Contacts
  Course Prefixes (Rubrics)
HELP
2017-2018 Course Catalog [ARCHIVED CATALOG]

Course Directory

Reading Course Descriptions

Brazosport College uses the Texas Common Course Numbering System in support of efforts to enhance the transferability of credit throughout the state system of colleges and universities. In addition to its descriptive title, each course is identified by a four character prefix (also called a rubric) to identify the department or discipline and a four digit number that is unique to each course within a rubric. The course number should be interpreted as follows:

First digit: level of the course

  0 – transitional  
  1 – freshman  
  2 – sophomore  
  3 – junior  
  4 – senior  
Second digit: number of semester hours of credit
Last two digits: identify a specific course within the rubric or department

For example, ENGL 1301  is a three-hour course in English typically taken the freshman year.

See Directory of Courses by Prefix for a table showing the prefixes associated with commonly used names for the various disciplines of study. There is a brief description of the course content and a list of any prerequisites (courses that must be taken or other conditions that must be met before enrolling in the course) and, in many cases, a tested skill level code in reading, writing, or math that must be met before enrolling in the course. See a counselor for specific information about the skill level testing and requirements.

Distance Learning and the Virtual College of Texas

Brazosport College participates in the Virtual College of Texas (VCT), a consortium of Texas community colleges for sharing Internet courses. Tuition and fees for courses taken for credit through the Virtual College of Texas are the same one would pay for similar courses at Brazosport College. Credit for VCT courses is shown on the Brazosport College transcript. Not every course that is listed on the state schedule will be available to Brazosport College students. Consult the VCT web site, then contact the Brazosport College Distance Education at 979-230-3368 for more information regarding Virtual College of Texas enrollment.

Required Skill Codes

Some courses offered by Brazosport College require college level skill codes in math, reading and writing.  Students who are certificate seeking, as documented in the student record, are not required to meet these requirements.  Skill codes are enforced for all degree seeking students.

Directory of Courses by Prefix

Directory of Courses by Catalog Prefix

Information regarding specific courses may be obtained by contacting the Brazosport College instructional division responsible for courses in that teaching discipline:

BAT: Bachelor of Applied Technology 979-230-3615
Com/FA: Communications and Fine Arts 979-230-3224
C/CT&OA Computer/Construction Technologies and Office Admin 979-230-3229
HlthProf: Health Professions 979-230-3424
M/LS: Mathematics and Life Sciences 979-230-3225
PS/PT: Physical Sciences and Process Technologies 979-230-3618
SS/Bus: Social Sciences and Business 979-230-3226
TE: Transitional Education 979-230-3527

Course Prefixes (Rubrics)  
 
  

  • INTC 2330 - Troubleshooting


    CIP 1504040011
    A hands-on approach to the techniques of troubleshooting in a sophisticated instrumented environment. Laboratory exercises requiring students to troubleshoot upsets in actual chemical processes. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: Grade of “C” or better in INTC 1343 .
    Required skill level: College-level reading and writing. Beginning algebra level math (placement code 2).
  

  • INTC 2333 - Instrumentation and Installation


    CIP 1504040011
    A capstone course in Instrumentation Technology that integrates material from previous courses. Students will design, size, install, connect, and start up a small pilot plant. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: Grade of “C” or better in  INTC 1343 .
    Required skill level: College-level reading and writing. Beginning algebra level math (placement code 2).
  

  • INTC 2339 - Instrument and Control Review


    CIP 1504040011
    An overview of instrument control technology in preparation for industry employment and national testing. Review and preparation for ISA Associate CST, NCCER and EPRI exams included. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Grade of “C” or better in INTC 1343 .
    Required skill level: College-level reading and writing. Beginning algebra level math (placement code 2).
  

  • INTC 2380 - Cooperative Education II - Instrumentation Technology


    CIP 1504040011
    Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. The student works for at least 20 hours per week. Conference meets one hour per week. Co-op positions will be provided when available, but otherwise the student must obtain their own employment which is applicable to either the instrumentation or electrical field. Students may register in only one co-op class per semester. Credit Hours: 3 (1 lecture, 20 lab)
    Prerequisite: Approval of the division chair.
  

  • INTC 2410 - Principles of Industrial Measurements II


    CIP 1504040011
    Additional principles of measurement. Includes devises used to measure process variables and basic control functions.  Principles and practices used with advanced flow and level applications.  Includes vortex, radar, ultrasonic, and Coriolis. Credit Hours: 4 (3 lecture, 1 lab)
    Prerequisite: Grade of “C” or better in INTC 1401  and INTC 1441 .
    Required skill level: College level reading and writing.  Beginning algebra level math (placement code 2).
  

  • ITNW 1325 - Fundamentals of Networking Technologies


    CIP 1110020007
    Instruction in networking technologies and their implementation. Topics include the OSI reference model, network protocols, transmission media, and networking hardware and software. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITSC 1305  or approval of the division chair.
    Required skill level: College-level reading.
  

  • ITNW 1351 - Fundamentals of Wireless LANs


    CIP 1110020007
    Designing, planning, implementing, operating, and troubleshooting wireless LANs (WLANs). Includes WLAN design, installation, and configuration; and WLAN security issues and vendor interoperability strategies. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITSC 1305  and ITNW 1325  or approval of the division chair.
    Required skill level: College-level reading. Intermediate algebra level math (placement code 3).
  

  • ITNW 1354 - Implementing and Supporting Servers


    CIP 1109010007
    Implement, administer, and troubleshoot information systems that incorporate servers in a networked computing environment. The student will configure peripherals, devices, and resources; set up servers; configure directory replication; manage licensing, system and user policies; and administer servers, disk resources, and directory services. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITNW 1325  or approval of the division chair.
    Required skill level: College-level reading.
  

  • ITNW 2305 - Network Administration


    CIP 1109010007
    A study of local area network components and their relationships. Students will create and administer user accounts and groups, plan and set up network file systems, create effective file system security, and implement and administer network printing. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITNW 1325  or approval of the division chair.
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITNW 2313 - Networking Hardware


    CIP 1109010007
    Maintain network hardware devices. Topics include network cables, servers, and workstations; network connectivity devices such as routers, hubs, bridges, gateways, repeaters, and uninterruptible power supplies; and other networking hardware devices. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITSC 1305  and ITNW 1325  or approval of the division chair.
    Required skill level: College-level reading.
  

  • ITSC 1301 - Introduction to Computers


    CIP 1504040011
    Overview of computer information systems. Introduces computer hardware, software, procedures, and human resources. Explores integration and application in business and other segments in society. Included is an introduction to the Internet and the World Wide Web, use of a word processor, spreadsheet, database, web page development, and presentation software. Credit Hours: 3 (2 lecture, 2 lab)
    Required skill level: College-level reading and writing.
  

  • ITSC 1305 - Introduction to PC Operating Systems (DOS/ Windows)


    CIP 1101010007
    A study of personal computer operating systems. Topics include installation and configuration, file management, memory and storage management, control of peripheral devices, and use of utilities. Credit Hours: 3 (2 lecture, 2 lab)
    Required skill level: College-level reading.
  

  • ITSC 1307 - UNIX Operating System I


    CIP 1101010007
    A study of the UNIX operating system, including multi-user concepts, terminal emulation, use of system editor, basic UNIX commands, and writing script files. Topics include introductory systems management concepts and file system and directory structure. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITSC 1305  and ITNW 1325  or approval of the division chair.
    Required skill level: College-level reading.
  

  • ITSC 1401 - Introduction to Computers


    CIP 1101010007
    Overview of computer information systems. Introduces computer hardware, software, procedures, and human resources. Explores integration and application in business and other segments in society. Included is an introduction to the Internet and the World Wide Web, use of a word processor, spreadsheet, database, web page development, and presentation software. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: College-level reading and writing.
  

  • ITSC 2321 - Integrated Software Applications II


    CIP 1101010007
    Continued study of computer applications from business productivity software suites. Instruction in embedding data and linking and combining documents using word processing, spreadsheets, databases and/or presentation media software. Credit Hours: 3 (2 lecture, 3 lab)
    Prerequisite:  POFI 2301  and POFI 1349  or approval of the division chair.
  

  • ITSC 2339 - Personal Computer Help Desk


    CIP 1101010007
    Diagnosis and solution of user hardware and software related problems with on-the-job and/or simulated projects. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: 12 credit hours in Computer Technology including: ITSC 1305 , ITSC 1301  or approval of the division chair.
    Required skill level: College-level reading and writing.
  

  • ITSC 2380 - Cooperative Education I - Computer and Information Systems


    CIP 1101010007
    Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. Cooperative education is a paid learning experience. Credit Hours: 3 (1 lecture, 20 lab)
    Prerequisite: Approval of the division chair.
  

  • ITSC 2381 - Cooperative Education II - Computer and Information Sciences, General


    CIP 1101010007
    Career-related activities encountered in the student’s area of specialization offered through an individualized agreement among the college, employer, and student. Under the supervision of the college and the employer, the student combines classroom learning with work experience. Includes a lecture component. Cooperative education is a paid learning experience. Credit Hours: 3 (1 lecture, 20 lab)
    Prerequisite: ITSC 2380  
  

  • ITSE 1307 - Introduction to C++ Programming


    CIP 1102010007
    Introduction to computer programming using C++. Emphasis on the fundamentals of structured design with development, testing, implementation, and documentation. Includes language syntax, data and file structures, input/output devices, looping, data manipulation, and array processing. Credit Hours: 3 (2 lecture/2 lab)
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSE 1332 - Introduction to Visual BASIC.NET Programming


    CIP 1102010007
    An introduction to the Visual Basic .NET computer language, including the preparation, coding, and testing of individual Windows applications. The focus of this course includes an introduction to programming concepts and methods with problem analysis and problem-solving techniques included. Data types, control structures, functions, syntax and semantics of the language, classes, class relationships, and exception handling will also be covered in this course. Credit Hours: 3 (2 lecture/3 lab)
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSE 1407 - Introduction to C++ Programming


    CIP 1102010007
    Introduction to computer programming using C++. Emphasis on the fundamentals of structured design with development, testing, implementation, and documentation. Includes language syntax, data and file structures, input/output devices, looping, data manipulation, and array processing. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSE 1432 - Introduction to Visual Basic .NET Programming


    CIP 1102010007
    An introduction to the Visual Basic .NET computer language, including the preparation, coding, and testing of individual Windows applications. The focus of this course includes an introduction to programming concepts and methods with problem analysis and problem-solving techniques included. Data types, control structures, functions, syntax and semantics of the language, classes, class relationships, and exception handling will also be covered in this course. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSE 2331 - Advanced C++ Programming


    CIP 1102010007
    Further application of C++ programming techniques including subjects such as file access, abstract data structures, class inheritance, and other advanced techniques. Credit Hours: 3 (2 lecture, 3 lab)
    Prerequisite: ITSE 1307  or approval of the division chair.
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSE 2349 - Advanced Visual BASIC Programming


    CIP 1102010007
    Further applications of programming techniques using Visual BASIC. Topics include file access methods, data structures and modular programming, program testing and documentation. Concepts of object-oriented programming are introduced along with database programming and use of the Windows API. Credit Hours: 3 (2 lecture/3 lab)
    Prerequisite: ITSE 1332  or approval of division chair.
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSE 2449 - Advanced Visual BASIC Programming


    CIP 1102010007
    Further applications of programming techniques using Visual BASIC. Topics include file access methods, data structures and modular programming, program testing and documentation. Concepts of object-oriented programming are introduced along with database programming and use of the Windows API. Credit Hours: 4 (3 lecture, 2 lab)
    Prerequisite: ITSE 1332  or approval of the division chair.
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSW 1307 - Introduction to Database (Access)


    CIP 1108020007
    Introduction to database theory and the practical applications of a database. The student will identify database terminology and concepts; plan, define, and design a database; design and generate tables, forms, and reports; and devise and process queries. The students receive hands-on experience with a database management system. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITSC 1301  or approval of the division chair.
    Required skill level: College-level reading.
  

  • ITSW 2337 - Advanced Database (Web-driven)


    CIP 1108020007
    Mastery of database design and functionality. Topics include relational database theory; use of advanced capabilities for online collection and distribution of data; and analysis of data using advanced database features. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITSW 1307  and IMED 1316  or approval of the division chair.
    Required skill level: College-level reading and writing. Intermediate algebra level math (placement code 3).
  

  • ITSY 1300 - Fundamentals of Information Security


    CIP 1110030007
    An introductory level course in information security designed to introduce the student to the terminology and multiple aspects of information security. Topics covered will be how to establish and implement information security goals and plans within an organization using firewalls, encryption, physical security, intrusion detection and biometrics. Identification of exposures and vulnerabilities to security will also be covered. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: ITNW 1325  or approval of the division chair.
    Required skill level: College-level reading.
  

  • MATH 0108 - Supplemental Transitional Algebra


    CIP 3201045319
    A study of equations, inequalities, polynomials, rational expressions, roots and radicals, and quadratic functions. Special approval is required for enrollment. Credit Hours: 1 ( 0 lecture, 3 lab)
    Required skill level: Intermediate Algebra Level
  

  • MATH 0404 - Pre-Algebra


    CIP 3201045119
    Introduction to mathematical reasoning and problem solving with an emphasis on the most basic concepts of arithmetic and algebra. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: Skill level requirement: Assigned according to test results.
  

  • MATH 0406 - Beginning Algebra


    CIP 3201045119
    Development of mathematical reasoning and problem-solving abilities with an emphasis on the concepts of beginning algebra. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: Beginning algebra level math (placement code 2).
  

  • MATH 0407 - Pre-Statistics


    CIP 3201045119
    Development of mathematical reasoning and problem solving abilities with an emphasis on preparation for a course in Statistics. Includes concepts from algebra, number systems, probability, and logic. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: Beginning algebra level math (placement code 2).
  

  • MATH 0408 - Intermediate Algebra


    CIP 3201045219
    Development of mathematical reasoning and problem-solving abilities with an intent to prepare a student for college-level work in mathematics. Includes concepts of intermediate algebra and other topics required for preparation for college-level mathematics. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: Intermediate algebra level math (placement code 3).
  

  • MATH 0410 - Individualized Transitional Mathematics I


    CIP 3201045119
    Self-paced, modular transitional mathematics, First Semester. Instruction is completed on a computer with the support of faculty. Topics will vary depending on student skill level and pathway, but may include signed arithmetic, decimals, fractions, basic algebra, equation solving, polynomials, graphing, rational expressions, set theory, logic, and probability. Credit Hours: 4 (3 lecture, 2 lab)
    Required skill level: Pre-Algebra level math (placement code 1)
  

  • MATH 0411 - Individualized Transitional Mathematics II


    CIP 3201045119
    Self-paced modular transitional mathematics, Second Semester as needed. Instruction is completed on a computer with the support of faculty. Topics will vary depending on student skill level and pathway, but may include signed arithmetic, decimals, fractions, basic algebra, equation solving, polynomials, graphing, rational expressions, set theory, logic, and probability Credit Hours: 4 (3 lecture, 2 lab)
    Prerequisite: MATH 0410 .
    Required skill level: Pre-Algebra level math (placement code 1).
  

  • MATH 0412 - Individualized Transitional Mathematics III


    CIP 3201045119
    Self-paced, modular transitional mathematics, Third Semester as needed. Instruction is completed on a computer with the support of faculty. Topics will vary depending on student skill level and pathway, but may include signed arithmetic, decimals, fractions, basic algebra, equation solving, polynomials, graphing, rational expressions, set theory, logic, and probability. Credit Hours: 4 (3 lecture, 2 lab)
    Prerequisite: MATH 0411 .
    Required skill level: Pre-Algebra level math (placement code 1).
  

  • MATH 1314 - College Algebra


    CIP 2701015419
    Complex numbers; solution of equations and inequalities; graphing techniques; functions including polynomial, rational, exponential, and logarithmic; systems of equations; theory of equations, applications of algebra. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 3 (3 lecture, 0 lab)
    Required skill level: College-level math. (placement code 9).
  

  • MATH 1316 - Trigonometry


    CIP 2701015319
    A study of the trigonometric functions. Includes definitions of trigonometric functions as functions of angles and of real numbers, identities, solutions to equations, graphing, inverse functions, and applications of trigonometry to solving triangles. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: MATH 1314  or concurrent enrollment in MATH 1314  or approval of the division chair.
    Required skill level: College-level math.
  

  • MATH 1324 - Finite Mathematics


    CIP 2703015219
    Applications of algebra, including linear systems, matrices, linear programming, probability, statistics, and interest calculation. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 3 (3 lecture, 0 lab)
    Required skill level: College-level math.
  

  • MATH 1325 - Business Calculus


    CIP 2703015219
    Differential and integral calculus of algebraic, logarithmic, and exponential functions with applications to business and economics. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: MATH 1314  or MATH 1324 .
    Required skill level: College-level math.
  

  • MATH 1332 - Quantitative Reasoning


    CIP 2701015119
    Modern algebra and geometry. Topics include introductory treatments of measurement and geometry, sets and logic, functions, financial mathematics, probability and statistics with appropriate applications.  Number sense, proportional reasoning,  estimation, technology, and communication are embedded throughout the course.  TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 3 (3 lecture, 0 lab)
    Required skill level: College-level math. (placement code 9).
  

  • MATH 1342 - Statistics


    CIP 2705015119
    This course includes a study of measures of central tendency and dispersion; probability; the binomial, the normal, the Poisson, Student’s t, and chi-square distributions; hypothesis testing; non-parametric tests; regression and correlation. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 3 (3 lecture, 0 lab)
    Required skill level: College-level math. (placement code 9).
  

  • MATH 1350 - Fundamentals of Math I


    CIP 2701015619
    A theory approach to the development of the real number system, set theory, fundamental operations and concepts of arithmetic, systems of numeration, functions, and logic. TI- 83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: MATH 1314 .
    Required skill level: College-level math.
  

  • MATH 1414 - College Algebra (Precalculus Track)


    CIP 2701015437
    In-depth study and applications of polynomials, rational, radical, exponential and logarithmic functions, and systems of equations using matrices.  This course is designed for students pursuing an academic plan requiring MATH 2413 , Calculus.  Students not required to take Calculus should enroll in MATH 1314 . Credit Hours: 4 (4 lecture, 0 lab)
    Required skill level: College level math (placement code 9)
  

  • MATH 2318 - Linear Algebra


    CIP 2701016319
    Introduces and provides models for application of the concepts of vector algebra. Topics include finite dimensional vector spaces and their geometric significance; representing and solving systems of linear equations using multiple methods, including Gaussian elimination and matrix inversions; matrices; determinant s; lilnear transformations ; quadratic forms; eiganvalues and eigenvector; and applications in science and engineering. (3 lecture, 0 lab)
    Prerequisite: MATH 2414  
    Required skill level: College Level Math (placement code 9)
  

  • MATH 2412 - Pre-Calculus


    CIP 2701015819
    Applications of algebra and trigonometry to the study of elementary functions and their graphs, including polynomial, rational, exponential, logarithmic, and trigonometric functions. Lines, circles, and other conic sections; vectors, polar coordinates, and parametric equations. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 4 (4 lecture, 0 lab)
    Prerequisite: MATH 1314  and MATH 1316  OR MATH 1414  OR approval of the division chair.
    Required skill level: College-level math.
  

  • MATH 2413 - Calculus I


    CIP 2701015919
    Limits, continuity, differential calculus of algebraic functions and of trigonometric functions, Mean Value Theorem, applications of differentiation, antidifferentiation, the definite integral, the Fundamental Theorem of Calculus, applications of integration. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 4 (4 lecture, 0 lab)
    Prerequisite: MATH 2412  or approval of the division chair.
    Required skill level: College-level math.
  

  • MATH 2414 - Calculus II


    CIP 2701015919
    Differentiation and integration relating to the exponential and natural logarithmic functions, the trigonometric functions, and the inverse trigonometric functions; techniques of integration; L’Hopital’s Rule; improper integrals; sequences and series. TI- 83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 4 (4 lecture, 0 lab)
    Prerequisite: MATH 2413 .
    Required skill level: College-level math.
  

  • MATH 2415 - Calculus III


    CIP 2701015919
    Power series, vector calculus, differential calculus of functions of more than one variable, directional derivatives, gradients, and other applications of partial derivatives, multiple integration and applications. TI-83 graphing calculator required unless otherwise noted by instructor. Credit Hours: 4 (4 lecture, 0 lab)
    Prerequisite: MATH 2414 .
    Required skill level: College-level math.
  

  • MATH 2420 - Differential Equations


    CIP 2701016419
    Ordinary differential equations, including linear equations, systems of equations, equations with variable coefficients, existence and uniqueness of solutions, series solutions, singular points, transform methods, and boundary value problems; applications of differential equations to real-world problems. Credit Hours: 4 (4 lecture/0 lab)
    Prerequisite: MATH 2414  
    Required skill level: College Level Math (placement code = 9)
  

  • MCHN 1302 - Print Reading for Machining Trades


    CIP 4805010002
    A study of blueprints for machining trades with emphasis on machine drawings. Credit Hours: 3 (3 lecture, 0 lab)
  

  • MCHN 1308 - Basic Lathe


    Introduction to the common types of lathes. Emphasis on basic parts, nomenclature, lathe operations, safety, machine mathematics, blueprint reading, and theory. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1313 - Basic Milling Operations


    CIP 4805010002
    An introduction to the common types of milling machines, basic parts, nomenclature, basic operations and procedures, machine operations, safety, machine mathematics, blueprint reading, and theory. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1325 - Millwright I


    CIP 4805010002
    An introduction to millwright technology. A study of common millwright tools and fasteners. Development of skills in basic layout procedures, gasket making and installation and oxygen/ fuel cutting. Emphasis on safety in the accomplishment of these activities. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1329 - Millwright II


    CIP 4805010002
    An introduction to millwright tools including specialty, power, and precision tools. A study of the property of metals and the installation of packing. Emphasis on safety in the accomplishment of these activities. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1338 - Basic Machine Shop I


    CIP 4805010002
    An introductory course that assists the student in understanding the machinist occupation in industry. The student begins by using basic machine tools such as the lathe, milling machine, drill press, power saw, and bench grinder. Machine terminology, theory, math, part layout, and bench work using common measuring tools is included. Emphasis is placed on shop safety, housekeeping, and preventive maintenance. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1341 - Basic Machine Shop II


    CIP 4805010002
    A continuation of Basic Machine Shop I. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1343 - Machine Shop Mathematics


    CIP 4805010002
    Designed to prepare the student with technical, applied mathematics that will be necessary in future machine shop related courses. Credit Hours: 3 (3 lecture, 0 lab)
  

  • MCHN 1352 - Intermediate Machining I


    CIP 4805010002
    Operation of drills, milling machines, lathes, and power saws. Introduction to precision measuring techniques. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1354 - Intermediate Machining II


    CIP 4805010002
    Development of job process plan to include operation of lathes, milling machines, drill press machines, and power saws. Set-up, layout, and tool maintenance is included. Emphasis on shop safety and preventive maintenance. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 1358 - Intermediate Lathe Operations


    CIP 4805010002
    Continuation of Basic Lathe Operations with emphasis on continued proficiency in lathe operations. Identification and operation of lathe machine tools, including basic tapered form turning and basic threading operations. Credit Hours: 3 (2 lecture, 2 lab)
    Prerequisite: MCHN 1308  
  

  • MCHN 1380 - Cooperative Education I- Machine Technologist


    CIP 4805010002
    Career related activities encountered in the student’s area of specialization are offered through a cooperative agreement between the college, employer, and the student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. Credit Hours: 3 (1 lecture, 20 lab)
  

  • MCHN 1381 - Cooperative Education II - Machine Technologist


    CIP 4805010002
    Career related activities encountered in the student’s area of specialization are offered through a cooperative agreement between the college, employer, and the student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. Credit Hours: 3 (1 lecture, 20 lab)
    Prerequisite: MCHN 1380  
  

  • MCHN 2302 - Intermediate Milling Operations


    CIP 4805060002
    A continuation of Basic Milling Operations with emphasis on continued proficiency in mill operation. Identification and operation of milling machines and support tooling including keyseat cutter, staggertooth cutters, rotary table and dividing heads. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2305 - Millwright III


    CIP 4805010002
    An introduction to bearings and seals. Identification of common bearings and seals. Emphasis on design and installation of seals, bearings, and couplings. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2307 - Millwright IV


    CIP 4805010002
    A study in the recognition and application of pumps. The course will focus on troubleshooting, repair, and installation of pumps. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2312 - Millwright V


    CIP 4805010002
    A study of the recognition and application of gearboxes. A review of drive installations using chain and belt drives. This course will focus on troubleshooting, repairing, and installing gearboxes, chain drives, and belt drives. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2314 - Millwright VI


    CIP 4805010002
    A study of the design, operation, and application of fans, blowers, and compressors. The course will cover the relationship and difference of pneumatic equipment as well as troubleshooting, repairing, and installing fans, blowers, and compressors. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2316 - Millwright VII


    CIP 4805010002
    A study of the operational principles of turbines, types of turbines, and the troubleshooting and repair of turbine equipment. Additionally the troubleshooting and repair of gearboxes will be covered. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2318 - Millwright VIII


    CIP 4805010002
    An introduction to equipment alignment techniques and procedures. Skill development in collinear alignment using both the conventional method of alignment and the reverse dial indicator method. This course will also introduce the student to laser shaft alignment. NCCER credit available. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2333 - Advanced Lathe Operations


    CIP 4805010002
    An advanced study of lathe operations. The identification and/ or use of special cutting tools and support tooling, such as, form tools, carbide inserts, taper attachments, follower, and steady rest. Close tolerance machining required. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2337 - Advanced Milling Operations


    CIP 4805010002
    An advanced study of milling machine operations. Identification and/or use of milling cutters and support tooling including end mills, slab mills, face mills, involute cutters, rotary tables, and indexing heads. A review of related math and machine theory. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2341 - Advanced Machining I


    CIP 4805010002
    An advanced study of lathe and milling operations. Emphasis on advanced cutting operations of the lathe and milling machines, including the use of carbide insert tooling, bench assembly, and materials metallurgy. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2345 - Advanced Machining II


    CIP 4805010002
    Advanced milling, drilling, grinding, and lathe operations to close tolerance dimensions. Emphasis on job planning and advanced uses of precision measuring instruments. Credit Hours: 3 (2 lecture, 2 lab)
  

  • MCHN 2380 - Cooperative Education III - Machine Tool Technologist


    CIP 4805010002
    Career related activities encountered in the student’s area of specialization are offered through a cooperative agreement between the college, employer, and the student. Under supervision of the college and the employer, the student combines classroom learning with work experience. Directly related to a technical discipline, specific learning objectives guide the student through the paid work experience. Credit Hours: 3 (1 lecture, 20 lab)
    Prerequisite: MCHN 1381  
  

  • MHSM 3302 - US Health Care Delivery


    CIP 5107010036
    This course introduces U.S. health care systems, the business of health care, the history of its development and the roles of various business entities and health care professionals in the delivery of care to the patient. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Junior standing.
    Required skill level: College-level reading, writing, and math
  

  • MHSM 3303 - Statistics for Health Care Managers


    CIP 5107010136
    This course expands on basic statistic knowledge by discussing unique statistics routinely used in health care assessment, utilization of published healthcare research statistics, and application of internal organizational health care statistics in managerial decisions. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Junior standing and successful completion of a college level mathematics course.
    Required skill level: College-level reading, writing, and math
  

  • MHSM 3304 - Communication for Health care Professionals


    CIP 5107010236
    This course addresses varying communication skills and strategies for interaction with patients, families, employees, other department/business representatives, and the community. It also covers basic marketing skills in the health care arena and media management during a crisis. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Junior standing
    Required skill level: College-level reading, writing, and math
  

  • MHSM 3310 - Legal Issues in Health Care


    CIP 5107010336
    This course examines the various federal, state, and local laws and regulations affecting health care delivery in the United States. It also covers public and private regulatory agencies, issues associated with professional malpractice, and business liability for health care products and services. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Junior standing
    Required skill level: College-level reading, writing, and math
  

  • MHSM 3335 - Financial Management for Health Care Managers


    CIP 5107010436
    This course covers various health care revenues sources, commonly used health care accounting software, department budget design, resource allocation, and methods of cost control. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Junior standing.
    Required skill level: College-level reading, writing, and math
  

  • MHSM 3411 - Health Care Information Technology


    CIP 5107010536
    This course introduces the different types of information maintained by health care organizations, commonly used health care software systems, robotic and automation interfaces, basic health care information security system standards, privacy issues, and record archival. Credit Hours: 4 (4 lecture, 0 lab)
    Prerequisite: Junior standing
    Required skill level: College-level reading, writing, and math
  

  • MHSM 4304 - Risk Management for Health Professionals


    CIP 5107010036
    This course explores quality assurance measures including Total Quality Management, Continuous Quality Improvement, and Joint Commission on Accreditation of Healthcare Organizations standards. Methods and applications for outcome measures, benchmarking, and utilization management in the health are setting are explored. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Senior standing
    Required skill level: College-level reading, writing, and math
  

  • MHSM 4310 - Human Resources in Health Care Management


    CIP 5107010036
    This course provides an overview of the special considerations of human resources in the health care industry, including job requirements, professional licensure, staffing ratios, job descriptions, traditional and nontraditional labor sources, legal issues and wages, and benefits management. Credit Hours: 3 (3 lecture, 0 lab)
    Required skill level: College-level reading, writing, and math
  

  • MHSM 4348 - Ethics for Health Care Professionals


    CIP 5107010036
    This course is a survey on ethical business practices in the health care industry during both routine practice and emergency/ disaster scenarios. In particular, ethical decision in the setting of limited resources (labor, materials, and funding) will be discussed. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Senior standing
    Required skill level: College-level reading, writing, and math
  

  • MHSM 4351 - Public and Community Health Management


    CIP 5107010036
    This course introduces the basic principles of public health, including epidemiology, wellness promotion, vaccination programs, community health education programs, and funding resources. Credit Hours: 3 (3 lecture, 0 lab)
    Prerequisite: Senior standing
    Required skill level: College-level reading, writing, and math
  

  • MHSM 4551 - Health Care Management Residency


    CIP 5107010036
    This course is a capstone learning experience that will provide onsite exposure to health care administration. Students will discuss experiences with course members and complete a project. Credit Hours: 5 (5 lecture, 0 lab)
    Prerequisite: Senior standing.  This course must be taken in the final semester of the program with the approval of the division chair.
    Required skill level: College-level reading, writing, and math
  

  • MRKG 1311 - Principles of Marketing


    CIP 5214010004
    Introduction to the marketing functions; identification of consumer and organizational needs; explanation of economic, psychological, sociological, and global issues; and description and analysis of the importance of marketing research. Credit Hours: 3 (3 lecture, 0 lab)
  

  • MUAP 1169 - Piano: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 1170 - Piano: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 1181 - Voice: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 1182 - Voice: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 1269 - Piano: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 2 (1 lecture, 1 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 1270 - Piano: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 2 (1 lecture, 1 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 1281 - Voice: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 2 (1 lecture, 1 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 1282 - Voice: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 2 (1 lecture, 1 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 2169 - Piano: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 2170 - Piano: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 2181 - Voice: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 2182 - Voice: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 1 (0.5 lecture, 0.5 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
  

  • MUAP 2269 - Piano: Music- Applied


    CIP 5009035426
    Music-Applied courses are offered only for full time students (minimum of 12 semester hours) concurrently enrolled in an ensemble or for music majors officially designated by HEGIS code and who meet the prerequisite listed below. Exception: If the appropriate theory courses are not offered in a given semester, the music major student must be concurrently enrolled in an ensemble. Course numbers are listed for piano and voice only. Instruction in other instruments is available. Consult Music Department personnel or the division chair. One-semester Hour Credit Voice Credit Hours: 2 (1 lecture, 1 lab)
    Prerequisite: For all Music -Applied courses - Successful completion of or concurrent enrollment in the appropriate freshman theory courses, and/or appropriate ensemble and/or approval of the division chair.
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7